Home - Products - Level - Magnetostrictive Level Transmitter

Magnetostrictive Level Transmitter


Magnetostrictive Level Transmitter

Magnetostrictive Level Transmitter

Magnetostrictive Level Transmitter LMT100

(Replacement for AT100)

High accuracy liquid level and interface level detection.

The LMT Series of level transmitters is a modular range of field mounted, advanced microprocessor-based electronic transmitters, utilizing multiple sensor technologies. Accurate and reliable measurement of liquid level and interface are provided in even the most difficult and hazardous industrial environments. The LMT100 is also available with optional temperature measurement.

LMT100 is preferred for: 

  • Interface Measurement
  • Exceptional performance with emulsion
  • Measurement with foam on layers fluid surface
  • Hydrocarbons and chemical control

Features: 

  • High accuracy: 0.01% of full scale or + 1.27mm
  • Never requires re-calibration: set it & forget it
  • Superior Sensor (Patent #5,473,245)
  • Local indication with HMI display
  • Dual compartment housing with separate field terminal compartment
  • Loop powered to 22m (75ft) probe length
  • Total and/or interface level measurement
  • Pressure to 165.48 bar (2400 psig) Std. 124.1 bar (1800 psig)
  • Temperature range: -195.5 to 426.6ºC (-320 to 800ºF) with options
  • Field replaceable/upgradable electronics module
  • Built-in RFI/EMI filter
  • Digital communications

Magnetostrictive Level Transmitter

Magnetostrictive Level Transmitter

Magnetostrictive Level Transmitter LMT200

(Replacement for AT200)

High accuracy non-intrusive liquid level and interface level detection.

The LMT Series of level transmitters is a modular range of field mounted, advanced microprocessor-based electronic transmitters, utilizing multiple sensor technologies. Accurate and reliable measurement of liquid level and interface are provided in even the most difficult and hazardous industrial environments.

Features: 

  • Calibrated from the factory
  • High Accuracy: .01% of Full Scale or +/- 1.27mm
  • Never Requires Re-Calibration: Set It & Forget It
  • Easy setup with waveform display
  • Not affected by agitation, foam or emulsion layers
  • No oscilloscope required
  • Designed to Mount Externally to K-TEK KM26 or other Magnetic Level Gauge
  • Superior Sensor (Patent #5,473,245)
  • Local Indication with HMI Display
  • Dual Compartment Housing with Separate Field Terminal Compartment
  • Loop Powered to 15.24m (50ft) Probe Length
  • Total and/or Interface Level Measurement
  • Temperature Range: -195.5 to 426.6ºC (-320 to 800ºF) with options
  • Field Replaceable / Upgradable Electronics Module
  • Built-in RFI / EMI Filter
  • Digital Communications
  • Online Self-verification

ABB Magnetic Level Gauge
Magnetostrictive Level Transmitter