 |
|||||
HOME |
Manufacturers |
Products |
FIELD SERVICE |
APPLICATION TOOLS |
CONTACT |
| ANALYZERS - OXYGEN | ||
 |
 |
Oxygen & Combustibles Analyzer SMA90The Oxygen & Combustibles Analyzer SMA90 is a microprocessor based industrial grade combustion analyzer that continuously samples and analyzes industrial flue gases (oxygen only or optional oxygen and combustibles).The analyzer is designed for use on gas, oil or coal fired combustion processes and has a high temperature operating range.Typical applications include those found in the utility and petrochemical industries. |
|
 |
Zirconia Oxygen Analyzer AZ100The Zirconia Oxygen Analyzer AZ100 is designed primarily for small gas- and oil-fired boilers in industry, power, hospitals and ships. It is also used for inert gas generators and oxygen enrichment applications. The AZ100 is a complete system comprising a zirconia oxygen probe and a wall- or panel-mount instrument. |
|
 |
Zirconia Oxygen Probe ZFG2The Zirconia Oxygen Probe ZFG2 gives the ultimate system flexibility while retaining exceptional reliability. A simplified design makes all the component parts easily accessible and field serviceable. Fully interchangeable with previous ABB models, and with the ability to upgrade from other manufacturer’s products, the probe, in common with earlier models, is of the in situ type. It is inserted directly into the boiler smoke box, or flue duct, eliminating the need for costly sampling installations. Operating in the process temperature range of 20 ... 600 °C (68 ... 1112 °F) the system gives true wet analysis of net excess oxygen in combustion gases. The probes can be fitted with a flame trap, thereby extending their use to measurement on gasfired boilers. |
|
 |
Zirconia Oxygen Probe ZGP2The Zirconia Oxygen Probe ZGP2 is designed to measure oxygen in oxidizing, and some reducing, furnace atmospheres. When used in conjunction with an appropriate electronics unit, the probe output voltage may be converted to a signal related either to oxygen concentration or oxidizing potential terms i.e. % O2, ppm O2, kilocalories or millivolts. |
|
 |
Endura Combustion Gas Oxygen Analyzer AZ20The Endura Combustion Gas Oxygen Analyzer AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB. The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring. |
|
 |
Endura AZ30The Endura AZ30 is an explosion-proof / flameproof combustion gas analyzer system designed for use in Hazardous Areas. The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring. |
| © Copy Right 2013, Measurement Controls and Recording Technologies | ||