Sensaphone
NEW Web600 Web-Based Monitoring and Alarm Notification
New Relay Output The Web600 now includes an SPST relay output that can be used to turn on a light, siren, or other device whenever an alarm occurs. The output is a normally open dry contact that can be used for low voltage switching. The relay is rated for up to 30VAC/VDC 1 Amp. The relay will engage whenever an input is above or below the programmed alarm limits and the programmed recognition time has been met. It will release as soon as the input returns to a normal condition.
Inputs: 6 universal inputs - Normally Cosed/ Normally Open Dry Contact, 2.8K/ 10K Thermistor, 4-20mA Current Loop.
Alarm Notifications: 8 Alarm Escalation Levels - E-mail, Text Messages, and SNMP Traps.
Special Features: Web Programmable. |
 |
Sensaphone Web600 Product |
Part # |
Price |
Add To Cart |
| Sensaphone Web600 |
FGD-W600 |
$355.50 |
|
| Sensaphone Web600 w/ International Power Supply |
FGD-W610-INT |
$373.50 |
|
| |
|
|
|
Sensaphone Web600 Accessory |
Part # |
Price |
Add To Cart |
| Web600 Battery Backup |
FGD-W610-B |
$67.50 |
|
| Accessory Wire |
FGD-0010 |
$6.00 |
|
| Mini Surge Protector - Power and Phone |
FGD-0067 |
$19.00 |
|
| Multi-Point Wireless I/O |
FGD-0205 |
$1,250.00 |
|
| J Type Thermocouple/4-20mA Converter |
FGD-0220 |
$349.00 |
|
| |
|
|
|
WEB600 Monitoring Sensors |
Part # |
Price |
Add To Cart |
| Magnetic Reed Switch |
FGD-0006 |
$9.00 |
|
| Infra-Red Motion Detector |
FGD-0007 |
$71.10 |
|
| Spot Water Detector |
FGD-0013 |
$81.00 |
|
| Temp Alert |
FGD-0022 |
$58.50 |
|
| Humidistat |
FGD-0027 |
$40.00 |
|
| Smoke Detector 110VAC |
FGD-0049 |
$55.00 |
|
| Smoke Detector 110VAC with Battery Backup |
FGD-0049-B |
$65.00 |
|
| Smoke Detector 220V |
FGD-0049-220V |
$69.00 |
|
| Humidity 4-20mA Transmitter |
FGD-0052 |
$143.10 |
|
| PowerOut Alert MODEL PS-110 |
FGD-0054 |
$59.00 |
|
| Zone Water Detector |
FGD-0056 |
$121.50 |
|
| Extra 10' Water Detection Rope |
FGD-0063 |
$63.00 |
|
| Carbon Monoxide Detector |
FGD-0065 |
$219.00 |
|
| Air Quality Sensor |
FGD-0066 |
$149.00 |
|
| Carbon Dioxide Sensor |
FGD-0068 |
$229.00 |
|
| Remote Temperature Sensor 2.8K |
FGD-0100 |
$18.00 |
|
| 2.8K Weatherproof Temperature |
FGD-0101 |
$27.00 |
|
| 2.8K Weatherproof Temp Sensor w/Traceable Calibration Certificate |
FGD-0101-NIST |
$130.00 |
|
| 2.8K Ultra Low -85C Temp Sensor w/Teflon wire |
FGD-0101-TEF |
$50.00 |
|
| 10K Weatherproof Temperature Sensor |
FGD-0102 |
$27.00 |
|
| 10 K Indoor Decorator Zone Temperature Sensor |
FGD-0103 |
$36.00 |
|
| 10K Outdoor Air Weatherproof Temperature Sensor |
FGD-0104 |
$63.00 |
|
| 10K Immersion Temperature Sensor |
FGD-0105 |
$54.00 |
|
| 2.8K Temperature Sensor with glass bead vial |
FGD-0107 |
$49.50 |
|
| 2.8K Weatherproof Temp w/Traceable Calibration Cert & Glass Bead Vial |
FGD-0107-NIST |
$155.00 |
|
| 2.8K Ultra Low -85C Temp Sensor w/Glass Bead & Teflon |
FGD-0107-TEF |
$75.00 |
|
| Float Switch |
FGD-0222 |
$35.10 |
|
| |
|
|
|
Sensaphone Web600 Web-Based Monitoring and Alarm Notification
The ALL NEW Sensaphone Web600 provides flexible web-based remote monitoring at an affordable price. Keep track of critical temperatures and other conditions and be notified immediately when current values exceed the normal range. Completely standalone and easy to use, the Web600 can be used for monitoring cold food storage, medical cold storage, and other temperature sensitive areas like computer rooms and data centers. In addition to temperature monitoring, the Web600 can also read values from humidity sensors, air quality sensors, water leak detection sensors and much more.
Sensor Inputs:
Connect up to six external sensors to monitor a variety of equipment and conditions. Each input zone can be connected to a temperature sensor, an analog transducer, or a dry contact switch.
Web Status:
Live status and history is only a webpage away. The Web600 built in web server provides quick and easy information about your monitored conditions. Even time stamped history reports are readily available online.
Alarm Notification:
When monitored conditions exceed normal values, the Web600 will notify you immediately be sending out e-mail alarm messages, and even text messages. Up to eight people can be contacted to make sure that proper action is taken.
Optional battery backup:
With the addition of the optional battery backup module, the Web600 can monitor for power failures and stay operational for two full hours while the power is out.
Web Programming:
Built in web server for easy access to programming and status. Just point your browser to the Web600’s webpage and fill in the blanks for a quick configuration.
|
|
ADVANCED CAPABILITIES
Sensor Inputs:
- Connect up to six external sensors to monitor a variety of equipment and conditions. Each input zone can be connected to a temperature sensor, an analog transducer, or a dry contact switch.
Web Status:
- Live status and history is only a webpage away. The Web600 built in web server provides quick and easy information about your monitored conditions. Even time stamped history reports are readily available online.
Alarm Notification:
- When monitored conditions exceed normal values, the Web600 will notify you immediately by sending out e-mail alarm messages, and even text messages. Up to eight people can be contacted to make sure that proper action is taken.
Web Programming:
- Built in web server for easy access to programming and status. Just point your browser to the Web600’s webpage and fill in the blanks for a quick configuration.
Optional battery backup:
- With the addition of the optional battery backup module, the Web600 can monitor for power failures and stay operational for two full hours while the power is out.
Sensaphone WEB600 Specifications Alarm Notification Methods:
- E-Mail, Text Messages, SNMP Traps
- 8 Alarm escalation levels
- Comprehensive scheduling per input, profile, and alarm destination
Destinations:
- 8 Programmable User Profiles
- 4 programmable alarm destinations per profile
Communication Types:
- E-Mail – SMTP
- Text Messages
- Web page – Supported formats HTTP, PDA, WAP, and XML
- SNMP – MIB with Traps, GET, GETNEXT, and SET
- MODBUS®/TCP Slave Conformance Class 0 and 1
Inputs:
- 6 Universal Inputs
- Normally Closed / Normally Open Dry Contact
- 2.8K / 10K Thermistor
- 4-20mA Current Loop
- 12 Bit Resolution
Data Logging:
- 32,000 Samples (all samples include data date and time)
- 1 second to 1 month sampling rate
- User programmable channel selection (Zones 1-6, Battery, and Input Power)
Communication Ports:
Local indicators:
- Alarm Status LED
- Power Status LED
- Ethernet link and Activity LEDs
Power Requirements
- External transformer 120VAC 60Hz
- Optional Battery Backup - Module (FGD-W610)
- Provides 2 hours of backup
Operating conditions:
- 0-90% RH, non–condensing
- 0-50°C (32–122°F)
Physical properties:
- 5.5" x 3.25" x 1.25"
- 0.5lbs
Standards:
Sensaphone WEB600 Support
The following documents are Adobe Acrobat Format.
Sensaphone WEB600 Manual
Sensaphone WEB600 Brochure
Sensaphone WEB600 Revisions History
|
| |
